Hardware RAID Controller

• Supports RAID 0, 1, 4, 5 and 10
• Hot Plug, Auto Hot Plug with SAF-TE support
• Private or Pool Hot Fix drives
• Hardware RAID is totally independent of the host and operating system
• Integrated, acoustic alarm

Optimum in Memory Technology

• Integrated 128MB PC133 ECC SDRAM
• Intelligent multi-level cache algorithm with adaptive delayed write and read ahead functions

Versatile Connectivity Capabilities

• Supports four internal independent SATA 1.0 channels
• Data transfer rate up to 150MB/sec. per channel
• Connection of one hard drive per channel (point-to-point configuration making cabling redundant)
• Cable length up to one meter
• No termination and no configuration of the hard drives required (advantage over SCSI and PATA with master/slave)
• Optional "ATA/SATA Converter Kit" to connect up to four parallel ATA (IDE) hard disks

High Configuration Flexibility

• ROM-resident setup (ICP RAID Console) with integrated Express Setup function (CTRL+<G>)
• Simultaneous operation of several disk arrays
• Flexible capacity setting
• Online capacity expansion
• Online RAID level migration
• Complete disk array migration
• Controller switch and controller upgrade without reconfiguration
• Automatic adaptation to changes in SATA configuration

Integrated RAID Software

• ICP RAID Console - installation and monitoring software, available for all supported operating systems with the same 'look & feel', text-based graphical interface, remote access via TCP/IP and IPX/SPX protocols

• ICP RAID Navigator - GUI tool for all Windows* operating systems above Windows* 95, context-sensitive online help, remote access to Windows*, Unix*, Linux* and NetWare* servers
• Support for messaging and online diagnosis
• Software updates based on Flash-RAM technology, making Internet downloads easier from this website

Multiprocessor RISC Architecture

• Intel* 80303 I/O processor, > 100 MIPS
• Hardware XOR Engine, integrated coprocessor for optimized RAID 4/5 operations
• Completely offloading the host CPU

PCI Bus Specifications

• 64-bit/66MHz PCI bus interface with up to 528MB/sec. data throughput
• Backwards compatible with 32-bit/33MHz, 64-bit/33MHz and 32-bit/66MHz PCI slots, as well as PCI-X slots
• Supports 5 Volt and 3.3 Volt PCI slots
• Supports PCI Hot Plug functions under Windows* 2000 and Novell* NetWare* (OS driver need for "hot replacement" and PCI Hot Plug System)

Delivery Contents

• ICP disk array controller in low profile PCI form factor with 128MB integrated SDRAM
• Always standard full height PCI bracket assembled, an additional bracket for low profile CPI slot is enclosed
• Quick Installation GuidUser's Manual and Quick Installation Guidee
• CD-ROM with tools and drivers
• Three-year warranty